CPS25
CPS25 Solvent-borne pigment stain, Mahogany
Solvent-borne pigment wood stain in a mahogany shade. Evens out colour variation, masks wood defects, levels well and is lightfast. Gives a red-brown mahogany tone. Spray, spray-and-wipe or roller coat; let down with S10/S12/S31/S90 at 200-1000 % (2-10 parts thinner to 1 part stain).
- Staining furniture in any wood species
- Veneer and solid wood in a mahogany look
- Evening out colour variation (alder, birch, beech, anegre)
- Pore highlighting on oak/ash when wiped with a binder
Mix calculator
Ask about CPS25
Answers are based on the CPS25 data and the products it mixes with.
Mixing matrix
- % by weight: 200–1000 (typ. 400) %dealer% by volume: 200–1000 %dealer
S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, more working time for wiping; S31 — general medium-evaporation thinner (mainly PU/acrylic/UV), which the dealer also allows for CPS25.
Dealer lists S10 / S12 / S31 / S90 at 200-1000 % by weight and by volume. Always make a test panel — the shade depends on species and dilution.
- % by weight: 500–1000 %catalog
S10 — fine-pore wood; S12 — medium-pore; S90 — open-grain wood and large areas.
2025/26 catalog figure for the whole CPS series (2022 catalog and the official CPS9 page give 500-2000 %). For CPS25 the dealer gives 200-1000 % — use that.
- CFS1Additive% by weight: 20–40 %dealer% by volume: 20–40 %dealer
Solvent binder — for wipe-on pore highlighting and to lock the pigment before priming.
Given by the dealer for CPS22/CPS23 (sibling ready colours); the CPS25 page lists no binder — use by analogy after a test.
- % by weight: 0–400 %catalog
The 2022 catalog lists CFS1, CFS3, CFS4 at 0-400 % for the CPS series without splitting them by method. From the binder records: CFS1 for spraying, CFS3 for roller, CFS4 for wiping.
- CFC3Additive% by weight: 200 %schedule
Roller coating flat anegre-veneer panels under a UV system, 60-80 g/m².
The schedule says 'CPS' with no colour. CFC3 is not described anywhere else (no page, not sold by the dealer); from the recipe it is a stain binder for UV systems (possibly a typo for CFS3, the roller binder). Confirm with Technocolor.
- S90Thinner% by weight: 200 %schedule
UV schedule, roller application.
- % by weight: any ratio %catalog
Shade matching: the catalog says CPS 'mixes perfectly with other solvent-borne stains'. Hints (derived): CPS9 to darken, CPS3 for more red, CPS22 to push towards walnut.
Record ratios by weight.
| Role | Material | % by weight | % by volume | When |
|---|---|---|---|---|
| Thinner | S10 / S12 / S31 / S90 | 200–1000 (typ. 400) %dealer | 200–1000 %dealer | S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, more working time for wiping; S31 — general medium-evaporation thinner (mainly PU/acrylic/UV), which the dealer also allows for CPS25.Dealer lists S10 / S12 / S31 / S90 at 200-1000 % by weight and by volume. Always make a test panel — the shade depends on species and dilution. |
| Thinner | S10 / S12 / S90 | 500–1000 %catalog | — | S10 — fine-pore wood; S12 — medium-pore; S90 — open-grain wood and large areas.2025/26 catalog figure for the whole CPS series (2022 catalog and the official CPS9 page give 500-2000 %). For CPS25 the dealer gives 200-1000 % — use that. |
| Additive | CFS1 | 20–40 %dealer | 20–40 %dealer | Solvent binder — for wipe-on pore highlighting and to lock the pigment before priming.Given by the dealer for CPS22/CPS23 (sibling ready colours); the CPS25 page lists no binder — use by analogy after a test. |
| Additive | CFS1 / CFS3 / CFS4 | 0–400 %catalog | — | The 2022 catalog lists CFS1, CFS3, CFS4 at 0-400 % for the CPS series without splitting them by method. From the binder records: CFS1 for spraying, CFS3 for roller, CFS4 for wiping. |
| Additive | CFC3 | 200 %schedule | — | Roller coating flat anegre-veneer panels under a UV system, 60-80 g/m².The schedule says 'CPS' with no colour. CFC3 is not described anywhere else (no page, not sold by the dealer); from the recipe it is a stain binder for UV systems (possibly a typo for CFS3, the roller binder). Confirm with Technocolor. |
| Thinner | S90 | 200 %schedule | — | UV schedule, roller application. |
| Additive | CPS22 / CPS24 / CPS9 / CPS3 | any ratio %catalog | — | Shade matching: the catalog says CPS 'mixes perfectly with other solvent-borne stains'. Hints (derived): CPS9 to darken, CPS3 for more red, CPS22 to push towards walnut.Record ratios by weight. |
Percentages are per 100 parts of component A.
Characteristics
- Components
- 1K stain + thinner (optional binder)recommended
- Carrier
- solvent-borne (ОР — органоразбавимый)dealer
- Lightfastness
- good (светостойкость)dealer
- Levelling
- good (хорошая выравнивающая способность)dealer
- Hiding
- high (высокая укрывная способность)catalog
- Pot life
- n/a (no hardener)recommended
- Gloss
- nonerecommended
- Thixotropy
- norecommended
- Drying · Conditions
- 20 °C
- Drying · Full dry (min)
- 20 mindealer
- Drying · Line flash-off (min)
- 5 minschedule
Colours
- CPS25 · mahogany
Application
HVLP
- Nozzle
- 1.2–1.4 (typ. 1.3) mmrecommended
- Pressure · air
- 1.5–2 barrecommended
- Spray viscosity
- 10–12 s DIN4recommended
- Consumption
- 80–100 g/m²dealer
- Flash-off
- 20 mindealer
Stir thoroughly — the pigment settles. Keep shaking/stirring the cup while you work. Lay one even wet coat, no puddles; go lighter on end grain (it drinks more and goes darker). To wipe: spray, give it 1-3 min, then wipe along the grain with a sponge or lint-free rag, packing pigment into the pores (pore-highlight effect on open-grain wood — needs a binder: 2022 catalog CFS1/CFS3/CFS4 0-400 %, dealer for CPS22/23 CFS1 20-40 %).
Cloth or pad
Wiping with a sponge or soft rag removes the excess after spraying (the catalog's method definition). For the pore-highlight effect on open-grain wood (oak/ash) a binder is required (catalog: 'when using a special binder').
Roller coater (UV)
Flat parts on a roller-coater line only. In the official UV schedule the stain flashes 5 min at 20-25 °C before VTS20011 UV filler.
Airmix (air-assisted airless)
- Nozzle
- 09/40-11/40 tip (0.23-0.28 mm)recommended
- Pressure · fluid
- 8–15 barrecommended
- Pressure · air
- 1–2 barofficial
For production lines; HVLP is plenty in a workshop.
Process and compatibility
- Substrate preparation
- Sand P150 → P180 → P220 (belt), de-dust.schedule
- Sanding
- Never sand the stain itself. Sand only the first primer coat (P280-P320); if you cut through to the stain, touch it up.recommended
- Temperature and humidity
- 15-25 °C, RH ≤ 75 %recommended
Storage
- Packaging
- 1 л / 5 л (дилер: 1 042 ₽/л, под заказ)dealer
Used in finishing systems
Mixed into
Sources
Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” comes from industry best practices (hover to see the reasoning).
- dealer CPS25: properties, application rates, thinners S10/S12/S31/S90 200-1000 %, pack/price
- dealer CPS24: full dry 20 min @20 °C
- dealer CPS22: CFS1 20-40 %, full dry 20 min (CPS23 page same pattern)
- official CPS9 (series reference): properties, methods
- 2022 catalog: CPS series thinner S10/S12/S90 500-2000 %, binders CFS1/CFS3/CFS4 0-400 %; palette lists CPS036 махагон
- UV anegre schedule CPS 100 / CFC3 200 / S90 200
- application methods (airmix pressures, wiping)
- dealer CPS036 Махагон (same shade, ready-to-use): thinners 0-100 %, full dry 20 min, CPS-series instruction PTS20 → PTL20 SM
Not covered by the sources
- no official t-color.ru page for CPS25
- CPS25 dealer page has no 'Все технические характеристики' block (drying 20 min taken from CPS22/23/24/CPS036)
- solids %
- viscosity as supplied
- density
- binder for CPS25 not listed by dealer (CFS1 20-40 % from CPS22/23)
- CFC3 code in UV schedule unexplained
- shelf life
- storage temperature
- SDS / hazard data
- no Technocolor TDS PDF found (web search budget exhausted this run; series-level search earlier found none)
- catalog thinner 500-1000 % vs dealer 200-1000 % for CPS25
- CPS25 absent from 2022 catalog palette (mahogany there is CPS036) — relation CPS25 vs CPS036 not documented by Technocolor